This article will introduce the controls, interfaces, and indicator lights of the AudioPro C10 MKII WiiM Edition.

Top Panel Controls and Lights

Fast flashing white: Waiting for Wi-Fi setup.
Slow flashing white: Restoring factory settings.
Solid white: Connected to Wi-Fi.

Each numbered control and light on the top panel is explained below:

	Power/Standby	Press to put the AudioPro C10 MKII WiiM Edition into standby mode or wake it.
	Source Switch	Press to switch the input source among Wi-Fi, Bluetooth, and Line-In.
	Bluetooth Pairing	Press to initiate Bluetooth pairing only when Bluetooth mode is selected. Note: If switched to Bluetooth mode without an existing connection, the device will automatically enter Bluetooth pairing mode.
	Volume Control	Press "+" to increase the volume or "–" to decrease it.
	Preset	Press buttons 1~6 to play the corresponding presets.
	Previous	Press to go back to the previous track.
	Play/Pause	Press to start or pause the playback.
	Next	Press to skip to the next track.
	Wi-Fi Status LED	Indicate the Wi-Fi connection status: Fast flashing white: Waiting for Wi-Fi setup. Slow flashing white: Restoring factory settings. Solid white: Connected to Wi-Fi.
	Bluetooth Status LED	Indicate the Bluetooth connection status: Flashing white: Waiting for Bluetooth pairing. Solid white: Bluetooth paired.
	Line-In Status LED	Indicate the Line-In connection status: Solid white: Line-In mode is selected.

Back Panel Controls and Interfaces

Each numbered control and interface on the back panel is explained below:

	Line In	Connect to external audio sources, such as CD players, audio players, for analog audio input.
	Sub Out	Connect to a powered subwoofer.
	Reset	Press to enter Wi-Fi setup mode. Press and hold for 10 seconds to restore factory settings.
	Power Input	100-240V AC input, 50/60 Hz.